UNS N08810 — 800 with controlled carbon and grain size — the pressure-vessel code version for creep service.
Nominal published values for the annealed condition. Certified heat lots ship with actual MTC values.
| Property | Value |
|---|---|
| Density | 8.02 g/cm³ |
| Min. yield strength (annealed) | 170 MPa |
| Min. tensile strength (annealed) | 450 MPa (creep-optimized) |
| Max service temperature | 1100 °C |
| Nominal chemistry | 800 base · controlled C 0.05–0.10% · Al+Ti ≤ 0.7% |
8 – 1219 mm · 0.5 – 20 mm · up to 18 m · 100% ET / UT · RT optional
Full welded pipe & tube page →ASTM B705 · ASTM B775 · ASTM B704 · ASTM B751 · ASTM B515 · ASTM B619 · ASTM B626
Confirm your standard →Pipe, fittings, bar, sheet, wire and forgings — consolidated into one PO with matching heats.
Incoloy 800H grade hub →Standard sizes per the welded pipe & tube range (see supply range above) are stocked or on a frequent smelting schedule for Incoloy 800H. Non-standard dimensions are made to order — confirm with your inquiry.
Every heat ships with EN 10204 3.1 MTC: ladle + product chemistry, mechanical results, dimensional data and heat number. Third-party witnessed 3.2 available on request.
Typical uses: HRSG & reformer tubes; Ethylene cracker tubes. If your medium, temperature or pressure differs, our metallurgists verify grade selection free of charge before quoting.
Dimensions, quantity, standard — that is all we need. A named metallurgist replies with pricing, lead time and MTC sample.