UNS N08825 · W.Nr. 2.4858 — Sulfuric and phosphoric acid plants, tank heating coils, pollution control.
Nominal published values for the annealed condition. Certified heat lots ship with actual MTC values.
| Property | Value |
|---|---|
| Density | 8.14 g/cm³ |
| Min. yield strength (annealed) | 241 MPa |
| Min. tensile strength (annealed) | 586 MPa |
| Max service temperature | 540 °C |
| Nominal chemistry | Ni 38–46% · Cr 19.5–23.5% · Mo 2.5–3.5% · Cu 1.5–3% · Ti 0.6–1.2% |
8 – 1219 mm · 0.5 – 20 mm · up to 18 m · 100% ET / UT · RT optional
Full welded pipe & tube page →ASTM B705 · ASTM B775 · ASTM B704 · ASTM B751 · ASTM B515 · ASTM B619 · ASTM B626
Confirm your standard →Pipe, fittings, bar, sheet, wire and forgings — consolidated into one PO with matching heats.
Send full BOM →Standard sizes per the welded pipe & tube range (see table above) are stocked or on a frequent smelting schedule for Incoloy 825. Non-standard dimensions are made to order — confirm with your inquiry.
Every heat ships with EN 10204 3.1 MTC: ladle + product chemistry, mechanical results, dimensional data and heat number. Third-party witnessed 3.2 available on request.
Typical service for Incoloy 825: Sulfuric and phosphoric acid plants, tank heating coils, pollution control. If your medium, temperature or pressure differs, our metallurgists verify grade selection free of charge before quoting.
Dimensions, quantity, standard — that is all we need. A named metallurgist replies with pricing, lead time and MTC sample.